The Importance of Choosing the High-quality Concrete for Your Foundation Repair

Do you go to to get the foundation repair service? When it comes to the concrete selection, make sure you know how to choose the high-quality products. The concrete is one of the kinds of building materials that are needed in establishing a building, especially a type of building with high voltage, as well as high rise buildings, bridges, irrigation, and road drainage. As the material of a building, of course, the need for concrete becomes a very vital yawning and even required a high level of endurance. This you can get by using quality materials. Because basically between concrete with other concrete also has some kind of difference, which of course determine the quality of the goods. To know which type of concrete has high quality with other standard concrete types, you can select it by doing some form of tips as follows:

Brand Selection

One of the things you can do to find out which type of concrete from the best concrete for building materials can be seen through the brands it has. To see the brand, you can see the surface, because usually on the surface of the concrete there is a brand name it has. As well as the concrete brands of Krakatau Steel, then Cakratunggal Steel, or even Mater Steel. All three types of brands are included in the category of the best concrete brands that have been widely used in Indonesia. All three brands are also included in the category of standard, so there is no need to worry about the quality of the concrete.


In addition to some form of the above section was also another section that can be used to find out how the quality it has. This is seen through the size of the concrete, either in terms of diameter or even the short length of the size of the concrete. for iron concrete has several sizes including 6 mm, 8 mm, 10 mm, 12 mm, 13 mm, 16 mm, 22 mm, 25 mm. A good iron must have a full size eg 8 mm must have a real size of 8 mm or at least a minimum tolerance of 0.2 mm so that the real becomes 7.8 mm. Iron length is usually 12 meters buckling or straight.